Undersampled field data

Figure 13 shows a recording of an airgun along with its spectrum.

 

undersample
Figure 13 Raw data is shown on the top left, of about a half-second duration. Right shows amplitude spectra (magnitude of FT). In successive rows the data is sampled less densely.

The original data is sampled at an interval of 4 milliseconds, which is 250 times per second. Thus, the Nyquist frequency $1/(2\Delta t)$ is 125 Hz. Negative frequencies are not shown, since the amplitude spectrum at negative frequency is identical with that at positive frequency. Think of extending the top row of spectra in Figure 13 to range from minus 125 Hz to plus 125 Hz. Imagine the even function of frequency centered at zero frequency--we will soon see it. In the second row of the plot, I decimated the data to 8 ms. This drops the Nyquist frequency to 62.5 Hz. Energy that was at -10 Hz appears at 125-10 Hz in the second row spectrum. The appearance of what were formerly small negative frequencies near the Nyquist frequency is called ``folding'' of the spectrum. In the next row the data is sampled at 16 ms intervals, and in the last row at 32 ms intervals. The 8 ms sampling seems OK, whereas the 32 ms sampling looks poor. Study how the spectrum changes from one row to the next.

The spectrum suffers no visible harm in the drop from 4 ms to 8 ms. The 8 ms data could be used to construct the original 4 ms data by transforming the 8 ms data to the frequency domain, replacing values at frequencies above 125/2 Hz by zero, and then inverse transforming to the time domain.

(Airguns usually have a higher frequency content than we see here. Some high-frequency energy was removed by the recording geometry, and I also removed some when preparing the data.)