Micromechanical analysis provides definite answers to the question of how the coefficients in double-porosity systems are to be computed from knowledge of the constituents' properties. The question then naturally arises whether this analysis can be generalized to multi-porosity systems. Certainly, multi-porosity systems are the ones most likely to represent realistic systems occurring in nature, for example, oil and gas reservoirs. And, therefore, we need to address these issues. Transport in triple-porosity and multi-porosity systems have already been studied by some authors (Bai, Elsworth, and Roegiers 1993b; Bai and Roegiers, 1997), hence, it is timely to consider the geomechanical aspects of these problems. We will set up the problem and describe its general characteristics here, but the full solution will be left to future work.
The resulting coefficient matrices will clearly take a form analogous the ones already studied. For example, in a triple-porosity system, the macroscopic governing equations are:
| 592#592 | (249) |
In general, for an N-porosity system of the form considered here, the total number of coefficients to be determined in the 593#593system of equations is N+1 diagonal and N(N+1)/2 unique off-diagonal coefficients, for a total of G = (N+1)(N+2)/2 coefficients. And the nature of a11 remains unchanged for any N. If we assume that each of the unique porosities can be associated with a Gassmann (microhomogeneous) material, then we have equations of the same form as (Gassmannss1) for each of these constituents, and therefore three mechanical coefficients plus the porosity of each constituent is assumed to be known, at least approximately, in order for this analysis to proceed. The uniform expansion/contraction scenario carries over to the multi-porosity system, but does not supply enough equations to close the system by itself for N > 2. To see this, note that once 527#527 and 549#549 are chosen, then all the remaining 528#528's are determined by the uniform strain condition and Gassmann's relations. Then, substituting these values into the multi-porosity system [e.g., (tripleporosity)], we see there are always two equations for each row of the matrix. This results in S = 2(N+1) equations just from this self-similar thought experiment. These two sets of numbers are compared in Table 2. In addition to these equations, we always have the 3 conditions from the long-time limits, and we can also find other equations as needed by considering other experiments on the system [e.g., see Berryman and Wang (1995)]. However, it is important to remember that it is the number of linearly independent equations that is pertinent, and determining this number has so far not proven to be a easy task for the general case. At the present writing, closure of the system of equations for the multi-porosity coefficients when N > 2 is an open question.
The analysis presented here has been strictly for isotropic constituents, and an isotropic overall multi-porosity system. Generalization to anisotropic systems is both possible and desirable, but the analysis obviously becomes more complex because of the proliferation of coefficients that results.
594#594